Category Archives: VoCore

Making the VoCore easier to connect to

After you get basic connectivity to your VoCore there are a couple of things you can do to make it a bit easier to work with on a daily basis. I work in Linux so my advice is oriented to the Linux/Unix way of doing things. Since modern apple systems are based on Unix there are parallels to the linux way, but I am not familiar with the details. If you work in on a Microsoft system you are on your own, PuTTY is a popular way to connect from Windows but it is very limited in some areas.

I work in a ssh session quite a bit and transfer files to the VoCore with scp so I set up ssh to log in without using a password. To do this you need a public key, either rsa or dsa. You may already have one, to see just run ls ~/.ssh in a terminal session. If you see either or you already have a key. If not you need to use ssh-keygen to set one up.

To allow connecting without the password nonsense you just run
scp ~/.ssh/ root@your VoCore's IP:/etc/dropbear/authorized_keys
you will need to use your password one last time, from now on either ssh or scp will connect using your key for authorization.

Now that this is set up, using the VoCore’s IP is a pain as well, both having to type it and also because it may change from time to time. To avoid this I use avahi. In a ssh session on the VoCore you need a couple of packages:

opkg update
opkg install dbus avahi-daemon

If the opkg update returns an error then you need to set up a working opkg.conf. The openwrt snapshots have changed the layout of their package repository so you need something like this to access it:
src/gz base
src/gz luci
src/gz management
src/gz packages
src/gz routing
dest root /
dest ram /tmp
lists_dir ext /var/opkg-lists
option overlay_root /overlay

If you want to use my repository which mimics the original VoCore image you need this:
src/gz chaos_calmer_packages
dest root /
dest ram /tmp
lists_dir ext /var/opkg-lists
option overlay_root /overlay

For some reason the dbus/avahi configuration is not installed by the packages, you will need to get it like this:
cd /etc/dbus-1/system.d/
mv avahi-dbus.conf avahi-dbus.conf.orig
cd -

Now you need to enable and start the daemons like this:
/etc/init.d/dbus enable
/etc/init.d/dbus start
/etc/init.d/avahi-daemon enable
/etc/init.d/avahi-daemon start

Now you can use a name for your vocore instead of the IP, it is just the VoCore’s hostname followed by .local. You can see your hostname with
uci show system.@system[0].hostname
Which for me is VoCore, with some images it is OpenWrt. Now I connect to my VoCore like this:
ssh vocore.local

Since I am using linux I can also find the luci interface by entering vocore.local in my browser address bar, this should work out of the box for Apple users as well. If you are using windows you will need to install support for this, I believe the appropriate software is Bonjour

You should also go to System->System in luci and set the time zone to your location so the time is correct.

First steps in VoCore

When you first start working with OpenWrt it can be very confusing, hopefully this will help you get started. This page is oriented to the VoCore, but only a few details are specific to a VoCore since it is a fairly standard OpenWrt installation.

First you need to realize that the VoCore is based on the development trunk of OpenWrt which means things are always changing, each day there is a new build available from and this is where the VoCore is configured to get software packages. My VoCore came with an image based on the Linux 3.10 kernel, the latest builds are using a 3.14 kernel so you can’t use the kernel module packages unless you upgrade the kernel too. There are several configurations out there, some have no default password, others have the password set to vocore, some set a default IP of others are set to Of course you can (probably will) change this but when starting if the password or IP address doesn’t work, try the alternative.

When you first power up your VoCore it will open a WiFi access point with a ssid of VoCore_xxxxxx, connect your computer, smartphone, tablet whatever to this AP and open a browser and connect to the Luci configuration page. To do this enter the IP in the address bar, if doesn’t work try This will give you the login page, log in and set a password by dropping down the system menu and taking the administration option.

You can wander around here and look at what is available but one of the first things I did was connect the VoCore to my home wireless network. It is easy to make the VoCore unreachable through the WiFi at this point so be ready to hookup the USB/Serial adapter to be able fix things. The key to not needing the adapter in the following is to NOT apply the changes until the very end, use the Save button NOT the Save & Apply button!

Here is how I set my VoCore up:
1. Drop down the Network menu and select WiFi, push the edit button and in the General Setup tab under Interface Configuration enter your network name for ESSID, select client in the Mode drop down, check the box by create and enter wwan for the interface name.
2. Press the Save button (not Save & Apply!).
3. Switch to the Wireless security tab and select your encryption type in the Encryption drop down and enter you network’s passphrase in the key field, push the Save button again.
4. Drop down the Network menu and select interfaces. On this page press the add new interface button and enter wwan for the Name of the new interface and select DHCP client for the Protocol of the new interface and check the radio button by Wireless Network and press the Submit button.
5. There should be a box at the top that says Unsaved Changes, click on this, double check the settings (especially the ESSID and passphrase) and then click the Save & Apply button.

The webpage will sit there forever with a spinning wheel because the VoCore has shutdown it’s AP and connected to your home network. Go to your wireless router’s dhcp client list and find the ip for the new connection, this is the VoCore so enter it in the browser’s address bar and login to the VoCore with the password you set.